3D Air Jordan High-Top Sneaker Keychains

SKU: AJK-001
  • 3D Air Jordan keychains moulded as mini high-top sneakers in soft PVC
  • A matching swing tag cast in the same colour, ready for your own logo
  • 7 stock colours, mixed inside one order from 50 pieces
  • Your own mark from 100 pieces; a new colour or mould from 500 pieces

Two moulded parts, one keyring

Air Jordan Keychains: a 3D High-Top, Scaled Down

Two cast parts make up every batch of Nike Air Jordan keychains. The first is the shoe: a 3D high-top basketball silhouette with the laces worked into the surface, a padded collar and a treaded outsole, cast in soft PVC. The second is the swing tag that hangs beside it, moulded in the matching colour with the mark on its flat face. Both parts are cast, trimmed and ringed at the same bench.

The numbers come off the piece we keep as the reference: about 4.4 cm heel to toe, 1.2 cm across, 2.6 cm tall, and roughly 13.8 g with the ring and tag fitted. Sneaker shops hang it on a peg, resale counters tie it to a pair, launch teams drop it into a goodie bag. Colour, mark and bagging are settled on one approved piece before a run of Air Jordan keychains starts.

Two Moulded Parts in One Keyring

The swing tag is cast separately in the matching colour, so your mark gets a flat, readable panel instead of a curved sidewall. On most Air Jordan keychains the tag carries the name and the shoe carries the shape.

Seven Colours, Split Across One Order

Black, red, blue, green, yellow, purple and pink sit in stock and mix in one run from 50 pieces, so a colour story is tested before a logo run is committed. Air Jordan keychains ship from our Shenzhen workshop.

A High-Top That Still Reads at 4.4 cm

Laces, a padded collar and a treaded outsole are all in the mould, so the piece still passes for a high-top hanging on a shop peg. Air Jordan keychains carrying your own mark on the tag start from 100 pieces.

Off the sample bench

Air Jordan Keychains: Sample Numbers and Order Terms

The numbers below come off the piece we hold as the reference, and the terms beside them are fixed when the quotation is confirmed.

Shoe materialSoft PVC, cast in one piece; silver-tone ring and chain
SilhouetteHigh-top basketball shape with moulded laces, padded collar and treaded outsole
Length x width x heightApprox. 4.4 cm x 1.2 cm x 2.6 cm
Weight, ring and tag fittedApprox. 13.8 g per piece
Colours held in stockBlack, red, blue, green, yellow, purple, pink
Swing tagCast in the matching colour; printed or moulded mark on request
HerrajesSilver-tone split ring, mounted on a short chain
BaggingOne piece per OPP bag, packed into export cartons
MOQ, stock colours50 pieces, mixed colours allowed
MOQ, your own mark100 piezas
MOQ, new colour or new mould500 pieces
Samples and bulk timingOne stock piece free, buyer pays the freight; bulk runs about 5-7 days after approval, plus about a week when a mark is added
Air Jordan keychains size chart: a 4.4 cm high-top sneaker measured against a ruler
Reference piece: 4.4 x 1.2 x 2.6 cm
Air Jordan keychains reference weight: 13.8 g with the split ring and swing tag fitted
Reference piece: 13.8 g, ring and tag fitted

What can be changed

Colour, Mark and Bagging

The cast shoe and the swing tag are the two parts a buyer usually changes: the colour of the pair, the mark on the tag, and how the piece is bagged. Each of the three is confirmed on a sample before a run of Air Jordan keychains begins.

The stock range: seven solid colours

Black
Red
Blue
Green
Yellow
Purple
Pink

Stock shades ship as they are. A Pantone reference or a physical colour sample starts a dyed batch from 500 pieces, and we keep one cast piece from the approved run as the standard for later orders.

Pair colour

Stock shades need no tooling. A custom shade starts from 500 pieces, matched to a Pantone number or a physical sample and kept as a cast reference for repeat orders.

Mark on the tag

The tag is the cleanest place for a customer mark, printed or moulded into its flat face. The shoe sidewall can also take a mark, though a curved surface lets less detail through.

Bagging and cartons

Each piece travels in its own OPP bag, with export cartons as the outer packing; hang cards, printed bags and gift boxes are priced as add-ons.

Moulded details

Laces, collar and outsole are all part of the mould. Send a drawing or a reference shoe and we quote a new mould and its tooling lead time separately.

Air Jordan keychains: the moulded swing tag that carries the customer mark, shown with the matching green high-top shoe

Where the piece sells

Sneaker Retail, Resale Counters and Launch Giveaways

Sneaker shops and resale countersStreetwear labels and club merchLaunch events and drop daysPromotional gift distributorsOnline sellers and marketplace storesTourist and souvenir shops

Air Jordan keychains sell in threes. The shop keeps one colour on the peg, the resale counter ties it to a pair, and the launch team drops it into a goodie bag.

What carries across all three is the pairing: a shoe that photographs well, and a tag that reads the mark from a metre away.

Fill a pegboard with silhouettes that do not repeat by ordering it alongside clog shoe keychains,

our canvas shoe keychains, or the wider realistic shoe keychain range.

On the bench

The High-Top and Its Tag, on the Bench

A short clip from the workshop: the cast shoe, the moulded laces and outsole, and the swing tag that hangs beside it.

The batch of Air Jordan keychains runs through trimming, ringing and one last look at the tag before the pieces are bagged.

Watch on YouTube

The order, step by step

From Your Enquiry to a Sealed Carton

  1. 01

    Tell us the shape of the order

    How many Air Jordan keychains, which of the seven colours, the artwork, the bagging and the destination country.

  2. 02

    Freeze the specification

    Colour mix, mark on the tag, ring and chain, and packing written down on one sheet you sign off.

  3. 03

    Sign off the sample

    A cast piece with the colour and mark applied is sent for approval before any mould time is committed.

  4. 04

    Cast the run

    The batch follows the approved piece and the written sheet, with pieces pulled during the run and compared against it.

  5. 05

    Check and bag

    Every piece is gauged, weighed and inspected, then counted and packed by colour against the packing list.

Checks before packing

What Gets Checked Before Air Jordan Keychains Are Boxed

  • Heel-to-toe length, width and height gauged against the approved sample
  • Cast surface with no short shots, flash or air pockets along the collar and laces
  • Sidestripe, eyelet ring and lace relief fully formed, with no under-filled detail
  • Colour of shoe and tag compared side by side with the retained cast reference
  • Mark on the tag checked for position, size and legibility against the artwork
  • Count and colour split verified against the packing list before the carton closes
Air Jordan keychains in assorted colours checked against the packing list before the carton is sealed

Questions buyers send us

Air Jordan Keychains: Buyer Questions

Can you match a particular Air Jordan colourway?

Yes. Send a Pantone number or a clear photograph of the pair you want to sit next to, and we cast the shoe and the tag in the closest match the PVC allows. Two-tone builds such as red over black or blue over white repeat most reliably, so we keep a cast piece from your first run of Air Jordan keychains as the colour standard.

Is the mark printed on the shoe or on the tag?

Either, but the tag suits most marks. Its flat face takes a printed or moulded mark with more detail than the curved sidewall of the shoe, and it can be read without turning the keyring over. Send the artwork and we will tell you which face it fits.

What is the minimum order for a colour or a mark?

Stock Air Jordan keychains start at 50 pieces, and one order can carry more than one colour. Adding your own mark starts at 100 pieces. A new colour or a new mould starts at 500 pieces.

Do you supply a sample first?

Yes. A single piece from our stock of Air Jordan keychains is free and you cover the freight. A sample carrying your own colour or mark is charged, because it has to be cast for that order.

How long does a bulk run take?

About five to seven days for a bulk run of Air Jordan keychains once the sample is signed off. Add roughly a week when your own mark is printed or moulded into the tag. Freight time depends on the destination and the method.

Can you produce exact brand marks or player numbers?

We can develop the silhouette, but protected logos, brand names and player likenesses are cast only against written authorisation from the rights holder. Send the authorisation along with your enquiry and we will confirm what is possible.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “3D Air Jordan High-Top Sneaker Keychains”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

TALK TO HUASAN CUSTOM

Solicitar cotización

Tell us the color mix, logo method and quantity you have in mind. Share your contact details, target market and any artwork, and we will reply with a quotation, lead time and sample plan.

Scroll al inicio

Cotización

Responderemos a tu solicitud en menos de 2 horas. Escríbenos directamente a: sales2@huasancustom.com

HUASAN is a China factory. If you have no import experience, contact us for help.

Cotización

Responderemos a tu solicitud en menos de 2 horas. Escríbenos directamente a: sales2@huasancustom.com

HUASAN is a China factory. If you have no import experience, contact us for help.