Acrylic Magnetic Picture Frames for Refrigerator, Mini Photo Frame for Polaroid Instant Photos
SKU: CXT-002
Four corner magnets, no backing pad — two acrylic sheets are drawn together at the corners, so the print is clamped between them rather than stuck to a magnet sheet
The print swaps in seconds — the sheets separate by hand, and the acrylic face over the photo takes the scuffs instead of the print
Fits a 3-inch instant print untrimmed — a 10.5 x 7.5 cm frame showing about 55 x 84 mm, straight from the camera
Holds on steel only — neodymium corner magnets grip a refrigerator door or metal board; plastic, timber and glass will not carry it
Acrylic Magnetic Picture Frames That Close on Four Corner Magnets
There is no back panel to unclip on acrylic magnetic picture frames. Two sheets of clear cast acrylic are drawn together by four magnets, one set into each corner, and the print is clamped between them. Nothing is glued, so the rear stays flat against a steel door and no adhesive pad can dry out and let go.
Because the sheets separate, a photo goes in or comes out by hand, and the acrylic face carries the scuffs that would otherwise land on the print. The corners are counter-bored so each magnet sits flush rather than proud.
Off the sample on the bench, these acrylic magnetic picture frames measure about 105 x 75 mm, and the window shows roughly 55 x 84 mm of the print. That is the 3-inch instant format, so a photo goes in straight from the camera, untrimmed. Closed, the two sheets and the print come to about 12 mm, and one frame weighs about 35 g.
Orange, red, green, clear, brown and blue are held in stock; other shades are cut to order. Stock orders leave in 3-7 working days, a printed or bespoke run takes 7-10 days. No minimum on stock shades; 100 pieces with a logo and 500 for a colour or size of your own.
Four Magnets, No Backing Pad
Magnets set into the four corners pull the front and rear sheets together, with the photo riding between them. The rear stays a plain acrylic sheet, so nothing is peeled or replaced.
Swap the Print in Seconds
Separate the sheets and the photo comes free, so a shop can refill a display or a home can swap a picture without tools. The acrylic face takes the wear — why these frames beat a print behind glass.
Steel Doors, Not Plastic
Sintered neodymium discs hold the frame on a refrigerator door, a metal notice board or a filing cabinet. A plastic cabinet, a timber door or a glass panel will not carry it, so the surface is worth settling before an order goes in.
Read off the piece on the bench
Acrylic Magnetic Picture Frames: Figures and Order Terms
Each figure was taken off a sample on the workshop bench, with the trading terms listed alongside.
Front and rear sheets
Clear cast acrylic, two sheets per frame, with the print held between them
Frame size
About 105 x 75 mm overall, cut for the 3-inch instant format
Visible window
About 55 x 84 mm of the print shows; the rest sits behind the border
Closed thickness
About 12 mm with the print between the two sheets
How the sheets close
Four corner magnets draw the sheets together; no back panel to unclip
Magnets
Sintered neodymium discs, one per corner, set flush with the surface
Surfaces it grips
Steel fridge doors, metal boards and filing cabinets; plastic, timber and glass will not hold
Weight per piece
About 35 g with sheets and magnets in place
Colours on the shelf
Orange, red, green, clear, brown, blue; other shades cut to order
Minimum, stock shades
50 pieces; shades can mix in one carton
Minimum, printed or bespoke
100 pieces with a printed logo; bespoke colour or size from 500 pieces
Sampling and timing
Stock ships in 3-7 working days; printed or bespoke runs 7-10 days
Reference frame: 10.5 x 7.5 cm, four corner magnets Reference frame: 35 g on the bench scale
What moves, and what it adds
Border Print, Sheet Shade, Frame Size and Packing
Four choices set the price here: what goes onto the border, the shade the sheets are cut from, how large the frame is, and how it leaves the carton. Each carries its own quote, so a change can be priced before any sheet is cut.
Shades held for acrylic magnetic picture frames
Orange
Red
Green
Clear
Brown
Blue
These sheets are held on the shelf for acrylic magnetic picture frames, so a colour match costs nothing and one carton can hold several shades. Anything outside the list is cut to a matched sheet: post a Pantone number or a physical chip, and the minimum for that run is quoted alongside the artwork, since shade and quantity are settled together. The first piece off a matched sheet is retained here as the standard for every reorder.
A logo printed on the acrylic border
The border carries a mark and a line of copy. UV printing holds fine detail and photos; silk screen suits flat solid colour. Send a vector file and a printed sample returns first; printing adds a proofing and production charge.
The shade the sheets are cut from
Stock sheets carry no colour-matching charge, which keeps a trial order small. A colour outside the list is matched to your reference and quoted with the artwork. A frosted or mirrored sheet is a separate brief.
The size of the frame
The cutting setup covers 2–6 inch instant formats, so a small favour and a large wall size share one artwork. Window and border depth change with size, so the print area is confirmed on a sample of your size.
How they leave the carton
Each frame is bagged singly and cartons pack from there. Header cards, gift boxes and retail-ready packing are all available, each with its own cost and minimum; a header card is the cheapest shelf-facing option.
Where they sell
Where Acrylic Magnetic Picture Frames Sell
Instant camera accessory sellersPhoto and stationery shopsHomeware and kitchen retailGift and souvenir standsWedding and event favoursOnline wholesale sellers
An instant camera counter keeps a tray of them by the till, a homeware aisle clips one to a fridge door, a souvenir stand sells one with a print already inside.
What closes the sale is the corner magnet: acrylic magnetic picture frames lift off a steel door without a mark and take a fresh print in seconds.
Shade mix is noted on the packing sheet while the cartons are filled, and a copy travels inside each box so the split can be counted at the far end.
Five Stages Between an Artwork File and a Boxed Order
01
Brief us on the run
The quantity, the sheet shades, the artwork file for the border, the size you want, the packing and the country the acrylic magnetic picture frames are shipping to.
02
Freeze the specification
Shade, print placement, frame size, magnet seating and the carton plan are set out on a single sheet for you to sign before cutting starts.
03
Sign off a printed piece
A frame is built from your file and couriered over, so shade, print position and the corner seats are read on a physical piece instead of a screen proof.
04
Cut, print, pair
Sheets are cut and edge-polished, the border printed and cured, magnets seated at the four corners, and each front matched to a same-shade rear, so frames leave as pairs.
05
Inspect, count, box
Every piece is gauged, weighed and pulled apart, a print is laid in and taken out again, and the run is counted shade by shade before the frames are bagged.
Inspected before it leaves the bench
Every Acrylic Magnetic Picture Frame, Checked Before Packing
Both sheets held to the lamp for scratches and swirl marks before they are paired into acrylic magnetic picture frames
Corner pockets gauged so each magnet sits flush with nothing proud of the face
Pair closed and pulled apart by hand to confirm the four corner magnets grip on finished acrylic magnetic picture frames
Window measured against the artwork, with a 55 x 84 mm print laid in to check the fit
Border print squared to the approved file, and shade compared with the retained standard sheet
Shade mix and piece count ticked against the packing sheet before the cartons close
Asked before the first order
What Buyers Ask About Acrylic Magnetic Picture Frames
What are the frames made from, and how do the four corner magnets work?
The sheets are high-clarity acrylic and the frame closes on four independent magnet catches. Two sheets are drawn together at the corners and the photo is clamped between them; there is no full magnet sheet stuck to the back. That makes the print easy to change and leaves the acrylic face over the photo as a scratch guard on every acrylic magnetic picture frame.
Can a logo or artwork be printed onto the acrylic?
Yes. UV printing and silk screen both run on the acrylic border. Send a vector AI or PDF file and a printed sample comes back first so the result can be checked in the hand. Printing carries an extra proofing charge and production cost, which is quoted with the artwork on your acrylic magnetic picture frames.
How strong are the corner magnets, and will the frame come apart?
Sintered neodymium discs hold the two sheets tightly, so normal handling and hanging on a refrigerator will not separate them. A hard drop should be avoided because it can shift a magnet out of its pocket. These frames grip steel and metal surfaces; a plastic, timber or glass surface will not hold acrylic magnetic picture frames at all.
What is the quality standard, and what happens if a batch has faults?
Every piece is inspected before it leaves, and sheets with a scratch, a missing magnet or a chipped corner are pulled out of the run. If a fault turns up in bulk within the agreed defect rate, we settle it with a replacement run or a price adjustment on the acrylic magnetic picture frames affected.
How long does a bulk order take, and is stock faster than custom?
Stock orders are scheduled to ship within 3-7 working days of payment. An order carrying printed logos or a bespoke sheet colour runs 7-10 days in production. The final date is confirmed against the quantity on the order, since a larger run takes longer to cut, pair and pack.
Do you send samples before a bulk run?
One stock sample is free and the buyer covers the freight. A pre-production sample of your own artwork can be arranged before the bulk run, so the shade and the print position are settled on a piece before production of your acrylic magnetic picture frames is scheduled.
Tell us the color mix, logo method and quantity you have in mind. Share your contact details, target market and any artwork, and we will reply with a quotation, lead time and sample plan.
Color, quantity and packaging options
Artwork and logo review
Sample and production requirements
Scroll al inicio
Envíenos un mensaje por WhatsApp
Cotización
Responderemos a tu solicitud en menos de 2 horas. Escríbenos directamente a: sales2@huasancustom.com
HUASAN is a China factory. If you have no import experience, contact us for help.
Cotización
Responderemos a tu solicitud en menos de 2 horas. Escríbenos directamente a: sales2@huasancustom.com
HUASAN is a China factory. If you have no import experience, contact us for help.
Valoraciones
No hay valoraciones aún.