Fridge Photo Magnets Built Like Mini Retro Cameras
These fridge photo magnets pair a printed acrylic camera face with a flexible magnetic backing, bonded into one piece. The print drops into the framed opening and sits clamped between the two layers, so a new photo goes on in seconds and the camera never leaves the fridge door. Three silhouettes cut from stock tooling: an instant-camera body and two rangefinder classics.
Each camera body stands 8.3 to 8.6 cm tall and weighs about 30 g with a print loaded. Retail programs run from 50 pieces in mixed shapes, printed fronts start at 100, and a brand-new outline needs one cutting die — the fee comes back once the order reaches the agreed volume.
The Photo Is Part of the Structure
Acrylic in front, flexible magnet behind — the two layers clamp the print flat with no sleeves or glue, and one of these fridge photo magnets releases the photo whenever a new print goes in.
Two Decoration Routes
Full-color UV printing for camera faces and landmark art, or coated sublimation blanks with the magnet pre-attached for your own heat-press line.
Stock Dies, Short Lead Times
All three camera silhouettes cut from existing dies, so sampling stays fast; only a brand-new outline adds a one-time die fee.
Body sizes and order terms
Fridge Photo Magnets Specifications
The three camera bodies behind these fridge photo magnets are measured below, with the print and order terms listed alongside.
Bahan
Acrylic front panel bonded to a flexible magnetic sheet
Reka Bentuk
Retro camera silhouettes — one instant-camera body and two rangefinder styles — with a framed window for the print
Saiz
Bodies 8.3, 8.5 and 8.6 cm tall x 3.4 cm wide; about 14 cm long with a print loaded
Unit weight
Approx. 30 g per piece including the print
Available colors
Green, yellow, dark green, white, blue, navy, brown and silver; other shades on request
Photo fitting
Prints slide into the framed opening and sit clamped between the panel and the magnet
Surface protection
PE film over the acrylic face; peel it off before display
Standard packing
Each piece bagged separately in OPP
Stock / mixed MOQ
From 50 pieces, shapes and colors mixed in one order
Printed-front MOQ
From 100 pieces
New-shape MOQ
From 500 pieces, plus a one-time die fee returned at the agreed quantity
Sample and lead time
A pre-production sample confirms the print before bulk; stock shapes finish in about a week, printed fronts quote with a firm date
Camera body height: 8.3 / 8.5 / 8.6 cm Approx. 30 g per piece with the print loaded
Printed faces and blank programs
Print the Camera Faces Your Market Wants
Choose a finished UV print run or a coated blank program for these fridge photo magnets, then lock the artwork on a pre-production sample.
Camera shades, ready to mix
Green
Yellow
White
Blue
Navy
Brown
Shade accuracy is confirmed on the pre-production sample before mass printing starts.
Camera face printing
Full-color UV printing for camera faces, client logos, landmark artwork and text — AI or PDF vector files give the sharpest edges.
Sublimation blanks
Coated blank panels with the magnet pre-attached, supplied as one semi-finished unit so your own press can bake the design on.
Retail packaging
Each piece ships in its own OPP bag; printed gift boxes and hanging cards are quoted as retail upgrades.
Outline and size
The three camera outlines cut from stock dies; a new silhouette needs one cutting die, refundable at the agreed order volume.
Where the camera sells
Photo Spots, Museum Stores and Gift Programs
Tourist attractions and photo spotsMuseum and gallery storesCamera and gift shopsScrapbook and craft brandsHotels, homestays and cafesCorporate souvenir programs
Souvenir retailers, museums and homestay hosts all stock this style because the guest supplies the picture: print a shot from the trip, seat it in the frame, and the camera holds it on the fridge door for years.
Print method, quantity, camera style, artwork files and delivery port.
02
Agree the artwork and method
Vector files locked for UV printing, or a blank program sized for your own sublimation line.
03
Check the pre-production sample
Camera shade, print placement and magnetic pull confirmed before mass production.
04
Run mass production
Panels printed, bonded to the magnets and filmed, with parts pulled at fixed intervals for comparison.
05
Pack and load
Every camera bagged separately before the cartons are sealed and shipped.
Checks before dispatch
Quality Checks on Every Camera Frame
Body height and width against the die drawing — 8.3, 8.5 or 8.6 cm
Magnetic pull tested on a steel surface
Acrylic face inspected scratch-free before the PE film is applied
Print registration and shade matched to the approved artwork
Bond strength between the panel and the magnetic backing
OPP bagging and carton counts tallied against the order
Common buyer questions
Fridge Photo Magnets FAQ
How does the frame hold a photo?
The face is an acrylic panel bonded to a flexible magnetic sheet, and the print slides into the framed opening between the two layers. Changing photos takes seconds — seat the new print in the frame and these fridge photo magnets hold it flat without sleeves or glue.
Can we order blank panels for our own sublimation line?
Yes. We supply coated blank panels with the magnet pre-attached as one semi-finished unit. Run the transfer on your own press; we share the recommended temperature and timing. Blank panels carry their own order minimum.
Can the camera faces carry our design?
Yes. UV printing and sublimation both work on these fridge photo magnets — camera color schemes, client logos, landmark art and text. Send AI or PDF vector files and a pre-production sample confirms the result before bulk.
How is the acrylic protected in transit?
A PE film covers the acrylic face of the fridge photo magnets; peel it off before display. Every magnet ships bagged on its own, and printed gift boxes or hanging cards can be quoted as retail packing.
Can we change the camera outline?
The three current silhouettes come off stock dies, which keeps minimums friendly. A brand-new outline needs one cutting die — a one-time fee that is refunded once the order reaches the agreed quantity.
Do you provide samples before the bulk run?
Yes. A pre-production sample of the fridge photo magnets confirms print, shade and magnetic pull before mass production. Sample cost applies and the buyer covers shipping.
Ulasan
Tiada ulasan lagi.
Jadilah yang pertama mengulas “Fridge Photo Magnets, Retro Camera Shape Acrylic Magnetic Photo Frame” Batal balasan
Tell us the color mix, logo method and quantity you have in mind. Share your contact details, target market and any artwork, and we will reply with a quotation, lead time and sample plan.
Color, quantity and packaging options
Artwork and logo review
Sample and production requirements
Tatal ke Atas
Hubungi kami melalui WhatsApp
Minta Sebut Harga
Kami akan balas permintaan anda dalam masa 2 jam. Sila e-mel kami terus di: sales2@huasancustom.com
HUASAN is a China factory. If you have no import experience, contact us for help.
Minta Sebut Harga
Kami akan balas permintaan anda dalam masa 2 jam. Sila e-mel kami terus di: sales2@huasancustom.com
HUASAN is a China factory. If you have no import experience, contact us for help.
Ulasan
Tiada ulasan lagi.